Shure SM86 Condenser Handheld Vocal Microphone

Click to enlarge

Shure SM86 Condenser Handheld Vocal Microphone
SM86 Vocal Microphone The Shure SM86 is a unidirectional (cardioid) condenser vocal microphone for professional use in live performance. An extremely rugged microphone, the SM86 withstands the rigors of touring while delivering studio-quality sound. The tailored frequency response of the SM86 reproduces vocals with clarity. A cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise. The built-in three-point shock mount minimizes handling noise, and a two-stage pop filter reduces wind and breath "pop" noise.

SM86-LC Cable not included

A rugged condenser microphone that features a tailored frequency response for clear reproduction of vocals. Built-in three-point shock mount and two-stage pop filter. Cardioid, Condenser. Features Specifications Accessories User Guides Condenser cartridge for studio quality sound Tailored frequency response for a clear reproduction of vocals Rugged construction withstands the rigors of touring sound Cardioid polar pattern minimizes unwanted background noise Excellent choice for stage monitors and personal monitors Built-in three-point shock mount minimizes handling noise Two-stage "pop" filter reduces wind and breath noise. Transducer Type

Condenser (electret bias)

Frequency Response 50 to 18,000 Hz

view larger

Polar Pattern Cardioid

Output Impedance 150 Ohms at 1 kHz Recommended minimum load impedance: 600 Ohms

Sensitivity (at 1,000 Hz) Open Circuit Voltage: -50 dBV/Pa (3.15 mV) (1 Pa = 94 dB SPL)

Output Clipping Level 1000 Ohm Load at 1,000 Hz: +3 dBV (1.41 V)

Maximum SPL (at 1,000 Hz) 1000 ohm load (1% THD): 147 dB

Self-Noise 23 dB typical, A-weighted

Dynamic Range (1000 ohms) 124 dB (maximum SPL to A-weighted noise level) Signal-to-Noise Ratio

71 dB at 94 dB SPL (IEC 651)* *S/N ratio is difference between 94 dB SPL and equivalent SPL of self-noise A-weighted.

Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of the output connector.

Power Phantom Supply Requirement: 11 to 52 Vdc, positive at both pins 2 and 3 Current Drain: 5.2 mA

Connector Three-pin (XLR) professional audio

Case Dark gray enamel-painted steel with matte-finished silver colored steel grille

Dimensions See User Guide

Net Weight Net: 278 grams (9.8 oz)

Environmental Conditions Operating: -18 degrees to 60 degrees C (0 degrees to 135 degrees F) (relative humidity >90%) Storage: -29 degrees to 74 degrees C (-20 degrees to 165 degrees F) (relative humidity >80%)

We provide great low prices for professional audio video and lighting for churches and stage From bose speakers to Yamaha digital mixers

Sale ItemsAmp ComparisonMixer Shoot Out