Klark Teknik DN 410B Sighal Processors


Click to enlarge


Klark Teknik DN 410B Sighal Processors
klark-tdknik-dn410b
Klark Teknik DN410B Dual channel, 5-parametrics per channel, combinable, with transformer balanced outputs Equalizers SIGNAL PROCESSORS DN410B

Analogue EQ has always been the cornerstone of the Klark Teknik range, and the DN410 is widely regarded as among the very best analogue parametric equalisers money can buy. Built to the usual uncompromising Klark Teknik standards, the DN410 is a dual channel, two rackspace device.

It features five filters per channel, and unlike many aparantly similar units, all bands are fully configurable between 20Hz and 20kHz. Each filter offers cut and boost of 25dB and +15dB respectively, with available bandwidth settings of 1/12th to 2 octaves.

Further, the DN410 may be configured (via a front panel switch) to be a single channel of ten filters if required. It is fitted with high and low pass filters for each channel, and signal relays which ensure that audio signal reaches the outputs even in the event of power loss. All filters are individually switched in and out of circuit, plus an overall channel bypass switch is fitted.

DN410s are found in many applications, but most commonly in theatre or AV situations where omnidirectional lavalier or lectern microphones are used.

Input Two Type Electronically balanced (pin 3 hot) Impedance (ohms) Balanced 20k Unbalanced 10k

Output Two Type Unbalanced (pin 3 hot) Min. load impedance 600 ohms Source impedance <60 ohms Max. level +22dBu

Performance Frequency response (20Hz-20kHz) Eq in (flat) +/- 0.5dB Eq out +/- 0.5dB Distortion (THD+N) < 0.01% @ 1 kHz, +4dBu Equivalent input noise (20Hz-20kHz unweighted) <-94dBu Channel separation >75dB @ 1kHz Gain -Infinity to +6dB Overload indicator +19dBu

Filters Type Parametric (2x5) Bandwidth Variable from 1/12 ~ 2 octaves Max. boost/cut +15/-25db Frequency ranges 20Hz-200Hz/200Hz-2kHz/2kHz-20kHz High Pass filter 15Hz-300Hz/12dB octave Lower Pass filter 2k5Hz-30kHz/12dB octave

Terminations Input 3 pin XLR Output 3 pin XLR Power IEC

Power Requirements Voltage 110/120/220/240V 50/60Hz Consumption <15VA

We provide great low prices for professional audio video and lighting for churches and stage From bose speakers to Yamaha digital mixers


Sale ItemsAmp ComparisonMixer Shoot Out